WOLF AROW ISO 22
A mineral oil, specifically designed to meet the requirements of the most important manufacturers of hydraulic equipment. It contains anti-wear, anti-oxidant, anti-corrosion and anti-foam additives.
Wpisz markę i model
- DENISON - HF-2
- EATON VICKERS - I-286-S
- EATON VICKERS - M-2950-S
- AFNOR - NF E 48-603 HM
- AFNOR - NF E 48-690
- AFNOR - NF E 48-691
- DIN - 51524 Part 2
- ISO - 11158, HM
- ISO - 6743-4, HM
A mineral oil, specifically designed to meet the requirements of most important manufacturers of hydraulic equipment. It contains anti-wear, anti-oxidant, anti-corrosion and anti-foam additives.
This oil is specifically designed to satisfy the requirements of the manufacturers of hydraulic systems where the highest demands are made concerning high pressure, temperatures or speeds. It is recommended for the hydraulic systems of the following types : Vickers, Gerotor, Gresen, HPM, Denison, Cessna, Hydreco and Worthington. It is also suitable for the lubrication of workshop equipment, reducing gears, bearings, compressed air systems and air screw compressors.
This oil contributes to long equipment life and decreases the need for maintenance thanks to its powerful anti-wear, anti-corrosion and anti-oxidant properties. Reduces the risk of foaming and protects equipment in case of small amounts of water.
Test | Metoda | Jednostka | Średni wynik |
---|---|---|---|
Gęstość w temp. 15°C | ASTM D4052 | g/ml | 0,855 |
Lepkość kinematyczna przy temp. 40°C | ASTM D445 | mm²/s | 21,3 |
Lepkość kinematyczna w temp. 100°C | ASTM D445 | mm²/s | 4,4 |
Indeks lepkości | ASTM D2270 | 117 | |
Temperatura krzepnięcia | ASTM D6892 | °C | -30 |
Tempera zapłonu metodą Clevelanda | ASTM D92 | °C | 195 |
Zastrzegamy sobie prawo do modyfikowania ogólnych charakterystyk naszych produktów, aby umożliwić naszym klientom czerpanie maksymalnych korzyści z najnowszych odkryć techniki.