WOLF OFFICIALTECH 5W20 MS-FE
Full synthetic motor oil meeting the requirements of the new Ford EcoBoost petrol engines. Ensures reduced fuel consumption and exhaust emission reduction, combined with excellent cold start behavior.
Type in your brand and model
- CHRYSLER - MS 6395
- FORD - WSS-M2C925-A
- FORD - WSS-M2C948-A
- ACEA - A1/B1-12
- ACEA - C5
- API - SN
- ILSAC - GF-5
This is a full synthetic lubricant based on carefully selected very high quality base oils. This oil is extremely fuel-efficient and meets the requirements of the new Ford EcoBoost petrol engines. It ensures a reduction of fuel consumption on partial and full load operation as well as reduction of exhaust emission. It has excellent cold starting behavior giving a very good operating reliability.
Meets the requirements of the Ford WSS-M2C948-B specification and is mandatory for Ford EcoBoost 1.0 3-cylinder engines and is required for further EcoBoost petrol engines.This oil can also be used where the vehicle manufacturer specifies a motor oil ACEA A1/B1 or API SN.
Thanks to its low viscosity and exceptional fluidity this oil considerably reduces wear and contributes to fuel savings and lower CO2 emissions. Selected additives reduce soot and deposits and ensure engine cleanliness.
| Test | Method | Unit | Average Results |
|---|---|---|---|
| Density at 15°C | ASTM D4052 | g/ml | 0.851 |
| Kinematic viscosity at 40°C | ASTM D445 | mm²/s | 42.3 |
| Kinematic viscosity at 100°C | ASTM D445 | mm²/s | 7.9 |
| Viscosity index | ASTM D2270 | 162 | |
| B.N. (HCLO4 method) | ASTM D2896 | mg KOH/g | 7.6 |
| Pour point | ASTM D6892 | °C | -39 |
| CCS viscosity at -30°C | ASTM D5293 | mPa.s | 5500 |
| Sulfated Ash | ASTM D874 | Mass % | 0.8 |
| Flash Point COC | ASTM D92 | °C | 220 |
We reserve the right to alter the general characteristics of our products in order to let our customers benefit of the latest technical evolutions.
