WOLF OFFICIALTECH 0W-30 LL III FE

This is a full synthetic lubricant based on carefully selected very high quality base oils. It is specifically formulated to meet the most demanding VW specifications available today - VW 504.00 and 507.00 - as well as the Long Life III requirements of the VAG Group. It is a Mid SAPS oil which meets Euro 4, 5 and 6 norms and provides protection to the Diesel Particulate Filter. This viscosity grade provides a proven fuel economy over a 5W30 grade.

Backwards compatible: 504.00 and 507.00 supersedes all previous VW specifications (502.00, 503.00, 503.01, 505.00, 506.00 and 506.01).All vehicles in the VAG Group (Volkswagen, Audi, Seat, Skoda) with extended oil drain intervals (30.000 km or 2 years) from 2007 onwards.Note: For V10 TDI and 5-cylinder 2.5 TDI engines, prior to 2007, where the 506.01 specification has to be used, this oil is not recommended. The first generation engines with pump injector units should use the 505.01 specification.

Low viscosity oil, which helps to reduce CO2 emissions and gives a minimum of 2% fuel saving. Contains a unique additive package to reduce ageing and extend drain interval. Engine durability is confirmed via demanding wear and piston cleanliness tests.

Test	Method	Unit	Average Results
Colour	VISUAL		Brown
Pour point	ASTM D6892	°C	-48
B.N. (HCLO4 method)	ASTM D2896	mg KOH/g	8.3
Viscosity index	ASTM D2270		197
Kinematic viscosity at 100°C	ASTM D445	mm²/s	11.7
Kinematic viscosity at 40°C	ASTM D445	mm²/s	59
Density at 15°C	ASTM D4052	g/ml	0.842