WOLF OE LEVELTECH 5W-30 UHPD
This synthetic based engine oil meets the specifications of a very broad range of different large truck manufacturers.
Type in your brand and model
- CATERPILLAR - ECF-3
- CUMMINS - CES 20077
- CUMMINS - CES 20081
- CUMMINS - CES 20086
- DAF - EXTENDED DRAIN
- DAF - PSQL 2.1 E
- DAF - PSQL 2.1 E LD
- DETROIT DIESEL - DFS 93K218
- DETROIT DIESEL - DFS 93K222
- DEUTZ - DQC IV-10 LA
- DEUTZ - DQC-IV-10
- DEUTZ - DQC-IV-18 LA
- DEUTZ - TTCD
- DTFR - 13D110
- DTFR - 15C100
- DTFR - 15C110
- DTFR - 15C120
- FORD - WSS-M2C213-A1
- IVECO - 18-1804 Classe TLS E9
- MACK - EO-M PLUS
- MACK - EO-N
- MACK - EO-N Premium Plus
- MACK - EO-O Premium Plus
- MACK - EO-S 4.5
- MAN - M3271-1
- MAN - M3277
- MAN - M3477
- MAN - M3575
- MAN - M3677
- MAN - M3775
- MB - 235.28
- MTU - Oil Category 2.1
- MTU - Oil Category 3
- MTU - Oil Category 3.1
- RENAULT - RGD
- RENAULT - RLD
- RENAULT - RLD-2
- RENAULT - RLD-3
- RENAULT - RLD-4
- RENAULT - RXD
- SCANIA - LDF-3 (excl. V8 engines)
- SCANIA - LDF-4
- VOITH - Retarder Oil Class B
- VOLVO - VDS-3
- VOLVO - VDS-4
- VOLVO - VDS-4.5
- ACEA - E11
- ACEA - E6-16
- ACEA - E7
- ACEA - E8
- ACEA - E9-16
- API - CI-4
- API - CJ-4
- API - CK-4
- API - SN
- JASO - DH-2
This synthetic based engine oil meets the specifications of a very broad range of different large truck manufacturers. Its low viscosity formulation and advanced friction modifiers allow you to increase fuel efficiency.
This versatile lubricant can be used in a broad range of different EURO V and EURO VI engines. It meets the specifications of different off- and on-road engine manufacturers, such as: Caterpillar, Cummins, DAF, Daimler Truck, Iveco, MAN, Renault, Scania, Volvo, etc.
The complete protection of the aftertreatment system and the friction-reducing properties enable you to reduce the amount of CO2 exhaust on a daily base.
| Test | Method | Unit | Average Results |
|---|---|---|---|
| Density at 15°C | ASTM D4052 | g/ml | 0.855 |
| Kinematic viscosity at 40°C | ASTM D445 | mm²/s | 74.6 |
| Kinematic viscosity at 100°C | ASTM D445 | mm²/s | 12.2 |
| Viscosity index | ASTM D2270 | 161 | |
| B.N. (HCLO4 method) | ASTM D2896 | mg KOH/g | 11.9 |
| Pour point | ASTM D6892 | °C | -39 |
| Sulfated Ash | ASTM D874 | Mass % | 0.99 |
| Flash Point COC | ASTM D92 | °C | 222 |
We reserve the right to alter the general characteristics of our products in order to let our customers benefit of the latest technical evolutions.
